
Ethernet, Wi-Fi & Camera Installation in Edmonds, WA
Wired networks, cameras, and smart home systems for Edmonds — including older view homes that take careful retrofit work.
Networking & Wiring in Edmonds
Edmonds view homes are wonderful and wiring-hostile: plaster walls, vaulted ceilings, detached garages, and decades of additions. We do the careful retrofit work these homes need, routing cable through the paths of least destruction and keeping any opening to wall-plate size.
From the Bowl to Perrinville and Meadowdale, we install Ethernet backbones, wired Wi-Fi, PoE cameras and smart lighting — tested and documented before we leave.
Edmonds Homes and What They Mean for Wiring
The Bowl and the streets around downtown have some of the older houses in the area, with plaster walls and additions from several decades. Plaster needs a gentler approach than drywall, so we plan routes through closets, attics and crawl spaces first and only cut where there's no alternative. A plaster wall can turn a two-hour run into a half-day, and we'll flag those runs during the walkthrough.
Westgate, Perrinville, Meadowdale and Five Corners are mostly mid-century and later homes, many on hillside lots with view-side living rooms, daylight basements and vaulted ceilings. Those layouts spread a house across levels, and a router near where the internet comes in rarely reaches the far side. Wired access points on each level fix it.
Detached garages, studios and ADUs are common here. We connect them with buried outdoor-rated cable or a point-to-point wireless bridge, depending on distance and whether trenching is practical, and once the link is in, cameras and Wi-Fi in the outbuilding ride on it. For longer runs, fiber is an option; our Cat6 vs Cat6A guide covers where copper runs out.
Permits and inspections in Edmonds
Data cabling inside a home doesn't need a permit anywhere in Washington. Electrical work — a new circuit to a detached studio, an EV charger, a panel upgrade — is permitted and inspected through the city or Washington L&I, whichever has jurisdiction, and we handle it. Any trenching for buried cable starts with a utility locate (811) before digging. Edmonds is served by Snohomish County PUD.
Edmonds neighborhoods we serve
Ready to start? Call (425) 390-4575 or request a free estimate.
Common Projects in Edmonds
Retrofits in older view homes and links out to the garage or studio.
Wiring Services
Careful Cat6 retrofits through plaster, vaulted ceilings and additions.
Networking
Wired access points on each level of hillside and view homes.
Surveillance
PoE cameras with local recording, including detached buildings.
Fiber Optic Cabling
Outdoor-rated fiber to ADUs, studios and workshops.
Smart Lighting
Hardwired smart switches and dimmers.
EV Chargers
Level 2 chargers, permitted and inspected.
FAQ
Answers To The Frequently Asked Questions.
Yes — either buried outdoor-rated ethernet or a point-to-point wireless bridge, depending on distance and trenching feasibility. Both give the outbuilding real, stable connectivity.
Regularly. Plaster needs a gentler approach than drywall — we plan routes through closets, attics, and crawl spaces first, and only cut where there's no alternative.
An Ethernet run is limited to 100 meters, about 328 feet. Cat6 carries 10 Gbps up to 55 meters and Cat6A up to 100. Past that, or where you want the most headroom between buildings, outdoor-rated fiber is the better choice.
Start from the cable path, not the view. Cameras go where outdoor-rated cable can reach them cleanly — often under the eaves on the street and entry sides — and are aimed to avoid pointing into bright sky.
Related Reading
Why Is Wi-Fi Bad Upstairs in Your Older Seattle Home? How to Fix It
Weak Wi-Fi upstairs in an older Seattle home? A wired access point fixes it, over a new cable or your existing coax. Here's what you don't need to buy.
Cat6 vs Cat6A: Which Should You Install in Your Seattle Home?
Both run 10 Gbps — the difference is how far. Cat6 gets you 55 meters, Cat6A gets you 100. Here's when that actually matters.
Outdoor Security Camera Placement: Where to Mount on a Seattle House
Where to mount outdoor cameras on a Seattle house: height, eave glare, and the cable path that decides which corner a camera can actually go on.
Ready for Better Wiring in Edmonds?
Free consultations and clear upfront estimates — licensed, insured, and local.