Ethernet, Cameras & Smart Home Wiring in Kirkland, WA

Kirkland mixes older ramblers and waterfront homes with new infill townhomes and houses — two very different wiring jobs. Older homes need careful retrofit work through finished walls. New townhomes often come with a builder's bare-minimum network that needs to be brought up to something that actually performs.

We install whole-home Ethernet, wired access points in place of mesh kits, PoE security cameras and smart lighting across Juanita, Rose Hill, Finn Hill, Houghton and downtown Kirkland. With so much Eastside work done from home, a reliable connection at the desk is often the first item on the list.

A lot of the ramblers and split-levels in Juanita, Finn Hill and Rose Hill were built from the 1960s through the 80s, wired for phones and cable TV rather than data. With attic or crawlspace access, a new Cat6 run usually needs only the hole where the jack goes. Where a wall is blocked, we cut openings no bigger than a single or double gang box so they can be covered with a wall plate; we don't patch or paint.

Newer townhomes near Totem Lake and downtown are a different job. They often have Cat6 runs from the builder that were never terminated, or a structured wiring panel with nothing in it. We trace and test what's there, terminate it, add a switch and access points, and add drops only where the builder skipped them. Townhomes rarely have an attic to work from, so a brand-new run takes more cutting than it would in a house, and we'll tell you upfront which ones those are.

Waterfront and view homes along Lake Washington usually want camera coverage on both the street side and the water side, and Wi-Fi that reaches the deck. Outdoor cameras and access points run on the same PoE cabling as everything else, and the cable path usually decides where a camera can realistically go. Our outdoor camera placement guide walks through how we pick spots.

Data cabling and camera wiring inside a home don't need a permit in Washington; townhome and condo HOAs can have their own rules, which we check first. Electrical work — dedicated circuits, EV chargers, panel changes — is permitted and inspected through the city or Washington L&I, whichever has jurisdiction, and we handle that process. Kirkland is served by Puget Sound Energy.